How To Calculate the Asphalt Quantity For Road

How To Calculate the Asphalt Quantity For Road

Numerous individuals often mistake asphalt for bitumen. Despite common belief, asphalt and the bitumen are not the same from a technical standpoint. How To Calculate the Asphalt Quantity For Road.

Asphalt consists of a blend of aggregates, binder (bitumen), and sand. The aggregates utilized in asphalt mixtures may include crushed rock, sand, gravel and or slags.

Bitumen serves as the liquid adhesive that binds asphalt together, contrary to the common misconception of using the term bitumen interchangeably with asphalt.

Asphalt finds extensive application in the construction and upkeep of the various road types, including highways, urban and rural roads, parking lots, and pathways. The distinction between asphalt and bitumen will be elaborated upon in a separate piece.

Read More

1. How to Create the Bar Bending Schedule Of Slab

2. Basics Of Land Surveying

3. Derivation of formula to set out the curves by the method of ordinates from a long chord

4. Estimation of the Material for Concrete

In this context, the focus will be on outlining the method for determining the amount of asphalt required and its associated expenses for the road development. The calculation process is straightforward, requiring only a set of specific data.

For Example

Length of the road = L = Five km = 5000 m

Width of the road = W = Six m

Thickness of the asphalt = H = 15 cm = 0.15 m

Qty Of the Asphalt Calculation:

Volume of the asphalt = L x W x H

= 5000 x Six x 0.15 = 4500 m³

Here, the density of the asphalt is taken as 2330 kg/m³

Therefore, qty of the asphalt = Volume of the asphalt x Density of the asphalt

= 4500 x 2330 = 10485000 kg = 10485 tons

Read More

1. Components of Road Structure

2. Bar bending schedule for footing

3. What is contour interval and Uses of contour maps in surveying

4. how to Calculate the height of an object using With theodolite

Cost of the asphalt:

Suppose the cost of the One ton asphalt is 6000 rs.

Cost of the asphalt = 10485 x 6000 = 62910000 rs

Quantity Of the Asphalt In Curved Road.

For Example

1. Width of the road = W = Six m
2. Thickness of the asphalt = H = fifteen cm = 0.15 m

Length of the curved road = (π x R x θ)/180 = (3.14 x ten x 100)/180 = 17.44 m

Volume of the asphalt for the curved road = Length x Width x Thickness

= L x W x H = 17.44 x Six x 0.15 = 15.696 m³

Qty of the asphalt for the curved road = Volume of the asphalt x Density of the asphalt

= 15.69 x 2330 = 36558 kg = 36.55 tons

Read More

1. Concrete Slump Test workability Procedure and result

2. What is Best Practice in the Construction

3. Types of Maps in the Drone Mapping

4. Thumb rule for Civil Engineers

Cost of the asphalt:

Suppose the cost of One ton asphalt is 6000 rs.

Cost of the asphalt = 36.55 x 6000 = 219300 rs

Note

If the area you are calculating has an irregular shape, it is recommended to divide it into multiple regularly-shaped sections. Then, apply the above method to calculate the volume and asphalt requirements for each section individually. Finally, add up the results to obtain the total volume and asphalt requirements for the entire area.

Other Post

1. What Is The RCC Concrete And Properties of RCC Concrete

2. What is the Long Wall Short Wall Method

3. What is the Differences between Pillar and Column

4. Civil Engineering Interview Questions and Answers

5. Calculation of Bricks and Blocks in the Wall

6. Civil Engineering Basic Field Knowledge

Thank You For Reading This Important Information. Get Benefits And Share With New Commers.